Description
Overview
The ResMed AirSense 10 AUTOSET APAC TRI C is the ultimate solution for achieving a peaceful and rejuvenating sleep. With its advanced AutoSet Algorithm, this machine offers a highly personalized sleep experience. It is equipped with a range of features that enhance comfort and convenience, including built-in humidification, a ClimateLineAir heated tube, Expiratory Pressure Relief (EPR) with auto feature, and the My Options color LCD with a light sensor for advanced data monitoring.
ResMed AirSense 10 Features
- AutoRamp™ – This new feature with sleep onset detection starts by delivering a low pressure for greater patient comfort. Then, once the patient falls asleep, it increases the pressure to the prescribed level.
- Humidity Level – Set humidity between 1 (lowest) & 8 (highest), or turn it off.
- Mask Fit – Runs a seal integrity check, showing green smiling face or red frowning face.
- SmartStart™ – Therapy automatically starts when it senses breathing.
- Mask Type – Set mask type being used: Nasal; Nasal Pillow; Full Face Mask
- Run Warmup – Preheat the humidifier water before starting therapy.
- Response – Provides a gentler transition during pressure increases.
- Easy-Breathe motor is whisper-quiet, offering you and your bed partner a more peaceful night’s sleep.
- The SmartStart™ function begins your sleep apnea therapy as soon as you breathe into your mask. When you remove your mask, it stops automatically after a few seconds.
- Expiratory pressure relief (EPR)Â maintains the optimal treatment for the patient during inhalation and reduces pressure during exhalation.
- AutoSetâ„¢ Response Can Be Set to Standard or Soft
- MyAirâ„¢ App Allows You to Track Your Therapy on Your Phone
ResMed AirSense 10 Specifications
Product Name | ResMed AirSense 10 AUTOSET APAC TRI C Machine |
Brand | Resmed |
Model | Airsens 10 Autoset |
Operating Temperature | +41 °F to +95 °F (+5 °C to +35 °C) |
Operating Humidity | 10 to 95% relative humidity, non-condensing |
Operating Altitude | Sea level to 8,500′ (2,591 m); air pressure range 1013 hPa to 738 hPa |
Pressure Sensor | Internally located at device outlet, analog gauge pressure type, 0 to 40 cm H2O (0 to 40 hPa) |
Flow Sensor | Internally located at device inlet, digital mass flow type, -70 to +180 L/min |
Maximum Gas Temperature | ≤ 106 °F (≤ 41 °C) |
Operating Pressure Range | 4 to 20 cm H2O |
Supplemental Oxygen | 4 L/min |
Dimensions (H x W x D) | 4.57″ x 10.04″ x 5.91″ (116 mm x 255 mm x 150 mm) |
Air Outlet | 22 mm |
Weight (device and standard water tub) | 44 oz (1248 g) |
Weight (device and cleanable water tub) | 44 oz (1248 g) |
Water Capacity | To maximum fill line 380 mL |